Essentials Of The Bicycle Wheels

By  A.Caxton

Shimano Duraace Scandium Tubeless Wheels

The article refers to the different contents of the bicycle wheels. It tries to explain the role that these important parts play in the smooth running of the wheels.

There is no better way to spend a weekend than to go on a leisurely ride on a bicycle on a quiet track in the woods. Bicycles have an old world charm about them and even in this fast-paced world has its own prominent place. Of all the parts of the bicycle, it is the bicycle wheels which are the most important ones. Bicycle wheels are the ones which carry the entire burden on them and thus need to be very carefully observed.

Types of Tires

Almost 99% of the bicycles have the clincher kind of tires. The clincher tires consist of an outer tire with a cross section which has a typical U – shape while there is another inner tube within the tire. Apart from these parts there are three key parts which create the tire. The first part is the Bead which is basically the rim of the tire. Normally, the beads contain hoops which are made up of steel wires which are very strong. The second very important part is the fabric. Tire manufacturers weave this cloth fabric between two beads to make the basic framework of the tire. The third major portion is the rubber. Rubber is used as an outer layer to the fabric. Rubber is used only after the basic framework is complete.

Apart from the clinchers, the bicycles also have wheels which are known as tubular tires. Unlike the clinchers, the tubular tires do not have any beads. In the tubular tires, the two rims of the tires are actually stitched together around the inner tube.

Other Tire Aspects

Bicycle tires have a part called traction. This traction is basically the resistance capacity of the tires which avoid skidding or slipping. Another very important aspect of bicycle wheels is the width and pressure of the bicycle wheels. The width and pressure of the wheels are inversely proportional. This implies that if the width of the wheel is greater then it has a low pressure and if the width is not very wide then it has a high pressure. Also generally, the wheels are made up of two basic types of rubber, namely natural latex rubber and butyl.

There are several other points apart form the features mentioned above. However, these are the most important features which make up the basic framework of the wheels of the bicycle and without which the wheels cannot work.

Author
Alastair Hamilton use to write for http://www.bikecyclingreviews.com .For additional information on truing a bike wheel subjects follow this link bicycle wheels